Leeb Hardness tester TKM‑359CE “Special”
Description
Exploitation
Technical specifications
Delivery set
Documents
Leeb Hardness tester TKM‑359CE “Special” is successfully used in particularly difficult production and field conditions.
Device is intended for non-destructive testing of production quality in metallurgy, mechanical engineering, aircraft, shipbuilding, atomic industry, oil and gas industry.
Hardness tester functions by Leeb method.
Leeb Hardness tester TKM-359CE “Special” controls hardness of following:
- All basic types of metals and alloys without additional calibrations (structural, tool, corrosion-proof, heat-proof, non-corrosive steels and alloys as well as alloys of nonferrous metals, castiron, aluminium, bronze, brass);
- Items with surface hardening and high frequency current hardening;
- Items of complicated configuration;
- Heavy and big items with rough surface.
Exploitation advantages
– Wide range of controlled metals and alloys.
– Low sensitivity to the curvative and roughness of surface.
– Monitoring of hardness change along the surface.
– Stable measurements independent from force and time of pressing the probe to the surface.
– Possibility of material identification in blank production.
– Control of “volumetric” hardness.
Features of TKM-359CE “Special”
- Impact-, dust- and water- proof housing.
- Bright color display allows working at below zero temperature and stays bright at any lighting.
- Signalization of exceeding of prescribed readings threshold.
-
Unique system of statistic data processing and averaging of readings.
- Fast adjustment of readings and programming of additional calibrations to basic scales by 2 or less standard blocks.
- Flexible device memory for recording of readings and their analysis.
- Programming of additional scales calibrations of hardness tester by 2 or less standard test blocks.
- Fast programming of additional scales by 2 to 10 standard test blocks.
Probes characteristics
| Photo | Probe Type | Weight/thickness/ surface roughness of the article under check |
Length/ |
Application |
 |
«D» | 3 kg/6 mm/Ra 3,2 | 138/21 mm | Solving of main hardness testing tasks with surface roughness less than 3.2 Ra |
| «E» | 3 kg/6 mm/Ra 3,2 | 138/21 mm | Probe with polycrystalline indenter made of cubic boron nitride to test materials with high hardness | |
 |
«G» | 8 kg/55 mm/Ra 7,6 | 200/29 mm | Hardness testing of high structure inhomogeneity items with surface roughness more than 7.2 Ra |
We also recommend to buy Combined Hardness tester TKM‑459CE combi
Additional equipment
-
-
-
Soft case and device arm cuff
Price: on request
We recommend
-
Magnetic-eddy-current flaw detector VID-345 (GTU kit)
Manufacturer: NPP Mashproject LLCPrice: on request -
