Case and cuff for fixing the device on the operator’s chest/arm

Soft case and device arm cuff is specially designed to protect the device when working in production or in the field. Prevents contamination and possible mechanical damage, increasing the service life of the hardness tester, flaw detector, or crack depth meter.

The case is designed exactly to fit the size of the device case that comes with the package.

In addition to the main protective function, there are various devices for the convenience of the operator:

1. Cuff for fixing the device on the arm;
2. A strap for placing the device on the operator’s chest;
3. Embedded magnets for fixing the device on a metal surface.

The main advantages of the product:

• The dimensions are adjusted to a specific device.
• The front part of the dense transparent film ensures convenient operation of the device.
• Magnets on the reverse side allow you to magnetize the case with the device to the metal surface, thereby freeing the operator’s hands.
• The cuff has wide elastic bands and Velcro straps for secure fixation of the case on the operator’s hand.
• Special metal brackets are provided on the sides for attaching the belt to the carabiners.
• All materials used in the case have high wear-resistant properties and are designed for long-term operation.

All materials used in the case and cuff have high wear-resistant properties and are designed for long-term operation.

• The dimensions of the case are adjusted to a specific device.
• The front part is made of thick transparent PVC film, providing convenient use of the device interface.
• The upper valve is fixed on a “Velcro”, preventing the device from falling out; it has a slot for the wires to exit.
• On the reverse side there is a device with sewn-in magnets for ease of operation.
• Also, a cuff is attached to the back side to fix the cover with the device on the operator’s arm.
• The cuff has a large Velcro area and wide elastic bands for secure fixation on the arm of any fullness.
• The strap from the sling is fastened on the sides of the case using metal carabiners.
• The special impregnation of the fabric provides protection from moisture.

Fabric type – Oxford 420

Front side of the case – Transparent PVC film

Cuff dimensions – 310 х 100 mm

1. Case — 1 piece
2. Cuff — 1 piece
3. Belt with carabiners — 1 piece